Description

Removes P1000 and finer scratches on gelcoat while offering a high gloss and fine finish (even on darker colored gelcoat), reducing time and expense

Formula provides longer wet time for extended product life and easier cleanup

Suitable for all gelcoat surfaces including marine, RV and industrial

Directions for Use

Compound between 1200 and 2000 rpm using a buffer equipped with a 3M™ Wool or 3M™

Foam Compounding Pad.

1. Apply enough material to work a 2` x 2` area with a thin film throughout the buffing process.

The product is designed to be used wet and buffed with a thin film. Important: If too much

compound is applied to the surface, product may create a heavy film that reduces workability.

If this occurs, remove excess material from both panel and pad surfaces. Spur buffing pad as

necessary.

2. Start buffing with medium pressure. For optimal finish, as the product begins to dry, reduce

pressure at end of buffing cycle. Product can be buffed or wiped dry

3. Use a soft cloth to remove any residual film and/or sling before moving on to another panel or

before polishing.

4. For added protection apply 3M™ Boat Wax (PN 36112/36113) after compounding is

completed.