3M™ Disposable Respirator, FFP2, Valved, 8822

  • Traditional cup shape, with nose clip and twin strap design.
  • The convex shape, twin strap design, nose foam and nose clip ensure comfortable wear over a range of face sizes.
  • 3M™ Cool Flow™ Valve: Effective removal of heat build up provides a cooler and more comfortable wear, Removes exhaled air and minimises the risk of misting eyewear
  • Reliable, effective protection against fine particles. Colour coded straps, blue = FFP2 (APF 10)

Description

The 3M 8822 respirator provides lightweight, effective,comfortable and hygienic respiratory protection against
dusts and mists. The convex shape, twin strap design, foam nose seal and steel nose clip ensure a good face seal over a range of face sizes. The unique valve and collapse resistant shell offer durable, comfortable protection particularly in hot and humid conditions. The 3M 8822 is exempt from costly time consuming maintenance requirements. The 3M 8822 is quite literally “maintenance-free”.

The product has been tested to the NEW European Norm EN149:2001 and has met the requirements of category
FFP2 in this standard.
The main performance tests in this standard are:
• Filter Penetration
• Total Inward Leakage
• Flammability
• Breathing Resistance
• Performance

The 8822 is at least 92% efficient against fine dusts, water based and non-volatile liquid aerosols down to 0.5 micron. It offers an Assigned Protection Factor of 10* (Nominal Protection Factor of 12); i.e., it can be used in atmospheres containing up to 10 times the Occupational Exposure Limit (OEL) of contaminant as specified in the Health & Safety Executive Guidance note EH40. * As detailed in BS4275: 1997

Warnings
• As with the use of any respiratory device, the wearer must first be trained in the proper use of the product.
• This product does not protect the wearer against gases, vapours, solvents from paint spray operations or
atmospheres containing less than 19.5% oxygen.
• Use only in adequately ventilated areas containing sufficient oxygen to support life.
• Do not use when concentrations of contaminants are immediately dangerous to life or health.
• Leave the area immediately if:
* breathing becomes difficult
* dizziness or other distress occurs
• Discard and replace respirator if it becomes damaged, breathing resistance becomes excessive, or at the end of
one shift.
• Never alter or modify this device.

 

Download Brochure

Download